Brand: QTlier

Color: Black

Features:

• Compatible: Only for iphone 6S 4.7 inch, Not for iphone 6.
• Good replacement parts for damaged, non-functioned screen, and solve dead pixel problem.
• This one is without home button and front camera, just like the picture shows.
• Each screen is tested one by one, 100% working and in a very good condition.
• Delivery by FBA with well packaging. Buy with confidence.

Publisher: QTlier

Details: Color: Black
1. ONLY fits for iphone 6s.
2. Tested one by one before shipping, 100% working, good quality replacement with 3D touch for your broken or non-functioned screen.
3. Professional installation is highly recommended, or you can install it by watching videos on YouTube.
4. Install it again if it is not working. If it still doesn't work, contact me please.
Attention Please

Refer to the installation tutorial on Youtube (Related Video Shorts)

Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.

Confirm the phone is power off before installation.

Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.

Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!

Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!

If you meet with these issues

Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc.

Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.

UPC: 647904039653

EAN: 736561072377

Package Dimensions: 7.1 x 5.6 x 0.6 inches