QTlier Screen Replacement for iPhone 6s, Digitizer Display with LCD Touch Screen Glass Frame Assembly with Repair Tools for A1633,A1688,A1700 Model - Black
Código: B07PWJQ32C

Compra Fácil y Seguro


  • En oferta
  • Precio habitual Precio: $39.95
Los gastos de envío se calculan en la pantalla de pagos.

Disponible
Quedan 0 unidades en inventario.
Tiempos de Entrega calculados para destino Ciudad Panamá. Tiempo de Entrega:

Fecha de Entrega:





Cotizar este artículo:
Paso 1: Ingrese su E-Mail en el campo abajo.
Paso 2: Haga Click en el botón que dice: "Crear Cotización".
Si esta registrado en su cuenta, no es necesario ingresar su Email.


Cotizar varios artículos:
Paso 1: Agregue los artículos a su carrito de compra.
Paso 2: Navegue a la página de su carrito.
Paso 3: Ingrese su email y cree la cotización desde la página de su carrito.
Si esta registrado en su cuenta, no es necesario ingresar su Email.


Brand: QTlier

Color: Black-6s

Features:

  • {Compatibility}: This iPhone 6s screen replacement ONLY for iPhone 6s 4.7 inch (A1633,A1688,A1700),NOT for iPhone 6/6p.
  • {Great Replacement}: To replace the faulty & defect LCD Display Touch Screen Digitizer Assembly. Such as the screen dose not respond properly, display problems, distortion pixels, cracked LCD screens, wrong color issues and old & dead LCD.
  • {Notes}: You need to transfer home button with fingerprint sensor,front camera, ear speaker and silver metal plate from your old phone.
  • {Package}: iPhone 6s Digitizer Display,QTlier Screen Protector,Repair Manual,Repair tools same with the picture shows are included.
  • {Quality}: All screens 100% Inspected by professional QC team before shipping and working perfectly,more wearable.

Publisher: QTlier

Details: Attention Please

Refer to the installation tutorial on Youtube (Related Video Shorts)

Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.

Confirm the phone is power off before installation.

Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.

Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!

Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!

If you meet with these issues

Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc.

Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.

Package Dimensions: 7.1 x 4.7 x 0.4 inches